Modern doors New Description
Wing panel’s 55 mm thick building block construction, 2 sheathings of steel sheet coated with PVC Renolit veneer, each 0.8 mm thick clamped on a wooden stile of high-quality glued timber. Filled with foamed polystyrene, also available with polyurethane foam. The combination of all the above elements gives a highly insulated and rigid wing construction. Locking system is made of two locks embedded in special part and head-on pressings of sheathings and protective cassettes fixed to the stile.
It it supplied to customers in the folded form which makes installation of doors in the hole much easier and faster.
Built of 4 asymmetric steel PVC Renolit veneer-covered steel profiles with 1.7 mm thick sheathing, tied at the corners with special cogs. It has anti-burglar reinforcements in hinge parts and locking points. Positioning of the frame in walls using the 6 assembly doweling strips to the wall with dowels Both the strips and the dowels are included in the assembly set that comes with the door. The frame can be filled with polyurethane foam, mineral wool or concrete mortar.
INSULATION AND SEALING
The wing is filled with a high quality foamed polystyrene with a lambda & lambda = 0, 04W/m2K.
Dual sealing system.
In order to obtain the highest possible effectiveness against air and water infiltration, in the case of doors opened to the inside, it is recommended to add resistant to weather conditions, decorative PVC drip.
THERMAL TRANSMITTANCE COEFFICIENT
For full door with 55 mm thick wing, at f Ud = 1.2 W/K*m2
For glazed doors with 55 mm thick wing, at Ud = 1.5 W/K*m2
One in the dap of frame, the other in the supporting part of the wing.
They reduce vibration and the loss of heat in the room, they do not lignify, they do not change the volume under the influence of atmospheric conditions.
RESISTANCE TO UV RADIATION
CAPITAL external layers of door frames and wings were made of metal covers with high-quality PVC veneer by RENOLIT from Germany. It is used by the vast majority of window woodwork producers thanks to its variety of colours and durability of covers.
MULTI-POINT LOCKING SYSTEM
The door is closed with a two multipoint locks entered with cylinder europrofile inserts delivered by one of the leading Polish producer of anti-burglary security solutions, LOB.
The locking system is complete with solid anti-unhinge pins located on the hinge side of the wing.
3 THREE-PART PIN HINGES
They provide additional anti-burglary protection
Possibility of door handles and pulls with a variety of shapes and features.
GLASS UNITS WITH DIFFERENT STRENGTH, TYPES AND PATTERNS
Glass doors are made using certified multi-window packages and warm plastic profiles from renowned Polish producers.
FRAME ROUND THE GLAZING MADE OF FOAMED PVC IN VENEER OR IN STAINLESS STEEL TO ENSURE HIGH AESTHETIC VALUES
Resistant to weathering, washing agents and preservatives.
What’s included in price of the door:
Door and door frame
Two independent locks (multi point locking mechanism)
Two sets of inserts with the keys
A set of seals
Prefited hinges and locks
Viewfinder (only with solid doors)
Door rubber strips